COMBINATION FIRMWARE (SM-G928W8) U5/S5 SAMSUNG GALAXY S6 EDGE + (Solve FRP+DRK)

Welcome To Gsmedge

Basic Information About Modified Rome By (Z3xteam)

You will need a special phone flash to solve many problems including skip FRP protection and skip the DRK Problem.

• Download Combination Samsung Galaxy S6 Edge + G928w8 U4/S5

Alerts before installing ROM:-The process of installing ROM at your own risk and does not bear any damage to your device.

-This Rom fit for a device SM-G928W8 Only and not fit for others and if the difference characters.

-Take a backup copy of your information to avoid losing your files if an error occurs.

-Charge the device to at least 20%.

-Do not remove the cable during installation.

-Illustrations may vary slightly.

-This method will not lose you the warranty of your phone.

• Required files:

-SAMSUNG USB DRIVER ===> HERE

-ODIN FLASHER ===> HERE

-COMBINATION G928W8VLU5ARA1 ===> HERE

1. Install usb driver on your computer.
2. Unzip the rum by right-clicking on the rum file and selecting Extract Here and you will see a tar.md5 file.

3. Enter the Mode (ODIN MODE) to turn off the device and then press the three buttons together (volume down button + home button + power button):

4. You will see the following alarm. Override the alarm by pressing the volume up button and the following image will appear on your device:

5. Run the Odin program and connect your computer to the computer. You will see a blue box with a number(COMXX) indicating your device.

6. Select the rum by pressing the AP button and selecting the rom.

7. Press START and wait for the device to restart .