SAMSUNG GALAXY S8 ACTIVE (SM-G892U) 4FILE REPAIR FIRMWARE ANDROID 7.0


Welcome On Teamgsmedge
  • Alerts before installing ROM:
-The process of installing ROM at your own risk and does not bear any damage to your device.
-This Rom fit for a device SM-G892U Only and not fit for others and if the difference characters.
-Take a backup copy of your information to avoid losing your files if an error occurs.
-Charge the device to at least 20%.
-Do not remove the cable during installation.
-Illustrations may vary slightly.
-This method will not lose you the warranty of your phone.
  • Required files:
-SAMSUNG USB DRIVER ===> HERE
-ODIN FLASHER ===> HERE
-FIRMWARE SAMSUNG SM-G892U ===> HERE

  • The method of install rom:
1. Install usb driver on your computer.
2. Unzip the rum by right-clicking on the rum file and selecting Extract Here and you will see a tar.md5 file
3. Enter the Mode (ODIN MODE) to turn off the device and then press the three buttons together (volume down button + hum button + power button):


4. You will see the following alarm. Override the alarm by pressing the volume up button and the following image will appear on your device:


5. Run the Odin program and connect your computer to the computer. You will see a blue box with a number(COMXX) indicating your device.


6. Select the rum by pressing the AP button and selecting the rom file as each (BL / CP / CSC).




7. Press START and wait for the device to restart itself.

When you restart your device, perform the factory setup to ensure the best performance for your device after installing the update.
Teamgsmedge
Teamgsmedge

The Gsmedge team strives to provide the best methods and programs to fix all the problems of the phones. For more inquiries, contact us via Whatsapp 00212658654381.

No comments:

Post a Comment